den fehler weiss ich nicht mehr genau stand aber immer da "pass with warnings" und dann irgendwas mit could not...
hm seit neuesten hat er dafür wohl öfters renews t3 und t4 timeouts..
Code:
May 31 2010 04:15:55 3-Critical R02.0 No Ranging Response received - T3 time-out
May 29 2010 07:46:09 6-Notice D106.0 DHCP Renew - lease parameters tftp file-willbeignored.cfg modified
May 26 2010 15:31:19 3-Critical R02.0 No Ranging Response received - T3 time-out
May 25 2010 19:46:04 6-Notice D106.0 DHCP Renew - lease parameters tftp file-willbeignored.cfg modified
May 24 2010 23:20:47 3-Critical R02.0 No Ranging Response received - T3 time-out
May 22 2010 07:45:59 6-Notice D106.0 DHCP Renew - lease parameters tftp file-willbeignored.cfg modified
May 15 2010 15:06:18 3-Critical R02.0 No Ranging Response received - T3 time-out
May 15 2010 07:45:49 6-Notice D106.0 DHCP Renew - lease parameters tftp file-willbeignored.cfg modified
May 14 2010 02:14:42 3-Critical R02.0 No Ranging Response received - T3 time-out
May 11 2010 19:45:44 6-Notice D106.0 DHCP Renew - lease parameters tftp file-willbeignored.cfg modified
May 11 2010 18:16:43 3-Critical R02.0 No Ranging Response received - T3 time-out
May 08 2010 07:45:38 6-Notice D106.0 DHCP Renew - lease parameters tftp file-willbeignored.cfg modified
Jan 01 1970 00:00:38 3-Critical R02.0 No Ranging Response received - T3 time-out
May 04 2010 19:44:22 3-Critical R04.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out
May 04 2010 19:44:08 3-Critical T05.0 SYNC Timing Synchronization failure - Loss of Sync
May 04 2010 19:41:22 3-Critical R04.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out
Code:
Channel ID 1
Frequency 546000000 Hz
Signal to Noise Ratio 34 dB
Downstream Modulation QAM 256
Power Level 1 dBmV
Channel ID 2
Frequency 554000000 Hz
Signal to Noise Ratio 34 dB
Downstream Modulation QAM 256
Power Level 1 dBmV
Channel ID 3
Frequency 562000000 Hz
Signal to Noise Ratio 35 dB
Downstream Modulation QAM 256
Power Level 2 dBmV
Channel ID 4
Frequency 570000000 Hz
Signal to Noise Ratio 35 dB
Downstream Modulation QAM 256
Power Level 2 dBmV
Upstream Bonding Channel Value
Channel ID 5
Frequency 30800000 Hz
Ranging Service ID 7615
Symbol Rate 5.120 Msym/sec
Power Level 44 dBmV
Upstream Modulation [3] QPSK
[3] 16QAM
Ranging Status Success
_________________
Unser Forum ist umgezogen. Neue Adresse:
Http://www.kabelbw-helpdesk.de/forum