KabelBW Helpdesk Archiv

Hi,

bin dabei meinen T-DSL nach KabelBW umzuziehen und habe auch einen schönen ARRIS 602 am Laufen und er funkt mit meinem Mac oder Vista oder dem SMC Router.

Leider ist mein ganzes Netz aber an einem tollen Cisco 871W und demgegenüber verweigert sicher der ARRIS 602 eine DHCP Antwort zu geben.

Über den SMC sieht das Int mit DHCP Antwort so aus:

CiscoKunr#sh int vlan2
Vlan2 is up, line protocol is up
Hardware is EtherSVI, address is 0023.0411.fda7 (bia 0023.0411.fda7)
Description: KabelBW Network
Internet address is 192.168.0.132/24
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:09:53, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
93 packets input, 18477 bytes, 0 no buffer
Received 19 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
82 packets output, 9535 bytes, 0 underruns
0 output errors, 1 interface resets
0 output buffer failures, 0 output buffers swapped out

Direkt angeschlossen antwortet das KabelModem nicht:

CiscoKunr#show int vlan2
Vlan2 is up, line protocol is up
Hardware is EtherSVI, address is 0023.0411.fda7 (bia 0023.0411.fda7)
Description: KabelBW Network
Internet address will be negotiated using DHCP
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 1/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 12000 bits/sec, 22 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
5926 packets input, 356124 bytes, 5 no buffer
Received 5931 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
9 packets output, 5562 bytes, 0 underruns
0 output errors, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
CiscoKunr#

Jemand einen Tipp ausser den Kabelanschluss wieder zu kündigen?

Ciao, Bernd